Post Reply 
Rate Thread
Threaded Mode | Linear Mode
Bike Carrier
08-05-2013, 11:46 AM
Post: #1
Bike Carrier
Does anybody have one of those rear bike carriers that you put on a hitch? I may need one to pick up a bike in socal this week.. wont know until tmrw but if so, I'd like to borrow/rent it for a day.
Find all posts by this user
Quote this message in a reply
08-05-2013, 12:27 PM
Post: #2
RE: Bike Carrier
Negative. Make sure the tongue will support the hitch. They usually only support around 500 pounds
Find all posts by this user
Quote this message in a reply
08-05-2013, 01:39 PM
Post: #3
RE: Bike Carrier
I have a bicycle hitch?

28 YEAR AMA CHARTER LIFE MEMBER! I ride the BUSA and THE GOLDWING 1800. Sold the Gsxr1000 for the 2002 KLR650
Find all posts by this user
Quote this message in a reply
08-05-2013, 03:24 PM (This post was last modified: 08-05-2013 03:25 PM by Rev. That Guy.)
Post: #4
RE: Bike Carrier
(08-05-2013 12:27 PM)LVNeptune Wrote:  Negative. Make sure the tongue will support the hitch. They usually only support around 500 pounds

yeah you pretty much need a truck with a class III hitch. Class II hitch is usually only good for 200-300lbs tongue weight at most. Class III can vary wildly too from 300lbs up to 800lbs or more. Then there is always class 4 but thats big bucks and not made for many vehicles.

I do have a trailer you can borrow. Its a 4x8 trailer with corner ties. Pulls super easy. Only thing I ask in exchange is the $16 to register it (tags still good but come due next month so i figure thats fair. there is no wheel chalk on it currently but I have one if you wanna bolt it down, just haven't gotten around to it. Its also a tilt bed but you would be better to use a ramp.

Let me know. Takes a 1-7/8 ball and I can even lend the hitch to ya too. Has a flat-4 plug.

- Justin
720-281-3738 (text me)

"You were taking it easy right? Because I could keep up with
you and from what I understand, I shouldn't be able to do that..."
- Ken "No Neck"

[Image: sig1.png]
Find all posts by this user
Quote this message in a reply
08-06-2013, 05:36 AM
Post: #5
RE: Bike Carrier
Thanks guys but false alarm. I really do appreciate your advice and loaner.
Should I ever need it at least I know who to ask. Wink
Find all posts by this user
Quote this message in a reply
08-08-2013, 01:56 PM
Post: #6
RE: Bike Carrier
(08-05-2013 03:24 PM)That Guy Wrote:  
(08-05-2013 12:27 PM)LVNeptune Wrote:  Negative. Make sure the tongue will support the hitch. They usually only support around 500 pounds

yeah you pretty much need a truck with a class III hitch. Class II hitch is usually only good for 200-300lbs tongue weight at most. Class III can vary wildly too from 300lbs up to 800lbs or more. Then there is always class 4 but thats big bucks and not made for many vehicles.

I do have a trailer you can borrow. Its a 4x8 trailer with corner ties. Pulls super easy. Only thing I ask in exchange is the $16 to register it (tags still good but come due next month so i figure thats fair. there is no wheel chalk on it currently but I have one if you wanna bolt it down, just haven't gotten around to it. Its also a tilt bed but you would be better to use a ramp.

Let me know. Takes a 1-7/8 ball and I can even lend the hitch to ya too. Has a flat-4 plug.

- Justin
720-281-3738 (text me)

Justin is that 702 or 720 area code? I think I will need your trailer after all. and probably today.
Find all posts by this user
Quote this message in a reply
08-09-2013, 08:47 AM
Post: #7
RE: Bike Carrier
(08-08-2013 01:56 PM)LVBrokr Wrote:  
(08-05-2013 03:24 PM)That Guy Wrote:  
(08-05-2013 12:27 PM)LVNeptune Wrote:  Negative. Make sure the tongue will support the hitch. They usually only support around 500 pounds

yeah you pretty much need a truck with a class III hitch. Class II hitch is usually only good for 200-300lbs tongue weight at most. Class III can vary wildly too from 300lbs up to 800lbs or more. Then there is always class 4 but thats big bucks and not made for many vehicles.

I do have a trailer you can borrow. Its a 4x8 trailer with corner ties. Pulls super easy. Only thing I ask in exchange is the $16 to register it (tags still good but come due next month so i figure thats fair. there is no wheel chalk on it currently but I have one if you wanna bolt it down, just haven't gotten around to it. Its also a tilt bed but you would be better to use a ramp.

Let me know. Takes a 1-7/8 ball and I can even lend the hitch to ya too. Has a flat-4 plug.

- Justin
720-281-3738 (text me)

Justin is that 702 or 720 area code? I think I will need your trailer after all. and probably today.

It is 720.. hes a homo and has an out of state Colorado number... faggg

[Image: 9d765f67-981a-472a-ac7e-cd56d5c63b90_zps...1369163536]
Find all posts by this user
Quote this message in a reply
08-09-2013, 09:08 AM
Post: #8
RE: Bike Carrier
(08-09-2013 08:47 AM)jZon Wrote:  
(08-08-2013 01:56 PM)LVBrokr Wrote:  
(08-05-2013 03:24 PM)That Guy Wrote:  
(08-05-2013 12:27 PM)LVNeptune Wrote:  Negative. Make sure the tongue will support the hitch. They usually only support around 500 pounds

yeah you pretty much need a truck with a class III hitch. Class II hitch is usually only good for 200-300lbs tongue weight at most. Class III can vary wildly too from 300lbs up to 800lbs or more. Then there is always class 4 but thats big bucks and not made for many vehicles.

I do have a trailer you can borrow. Its a 4x8 trailer with corner ties. Pulls super easy. Only thing I ask in exchange is the $16 to register it (tags still good but come due next month so i figure thats fair. there is no wheel chalk on it currently but I have one if you wanna bolt it down, just haven't gotten around to it. Its also a tilt bed but you would be better to use a ramp.

Let me know. Takes a 1-7/8 ball and I can even lend the hitch to ya too. Has a flat-4 plug.

- Justin
720-281-3738 (text me)

Justin is that 702 or 720 area code? I think I will need your trailer after all. and probably today.

It is 720.. hes a homo and has an out of state Colorado number... faggg

right.... go buy another hat and fuck off!

- Justin

"You were taking it easy right? Because I could keep up with
you and from what I understand, I shouldn't be able to do that..."
- Ken "No Neck"

[Image: sig1.png]
Find all posts by this user
Quote this message in a reply
08-09-2013, 10:39 AM
Post: #9
RE: Bike Carrier
Alrighty.....

Work Smarter, Not Harder. Cool
Find all posts by this user
Quote this message in a reply
08-09-2013, 10:44 AM
Post: #10
RE: Bike Carrier
(08-09-2013 09:08 AM)That Guy Wrote:  
(08-09-2013 08:47 AM)jZon Wrote:  
(08-08-2013 01:56 PM)LVBrokr Wrote:  
(08-05-2013 03:24 PM)That Guy Wrote:  
(08-05-2013 12:27 PM)LVNeptune Wrote:  Negative. Make sure the tongue will support the hitch. They usually only support around 500 pounds

yeah you pretty much need a truck with a class III hitch. Class II hitch is usually only good for 200-300lbs tongue weight at most. Class III can vary wildly too from 300lbs up to 800lbs or more. Then there is always class 4 but thats big bucks and not made for many vehicles.

I do have a trailer you can borrow. Its a 4x8 trailer with corner ties. Pulls super easy. Only thing I ask in exchange is the $16 to register it (tags still good but come due next month so i figure thats fair. there is no wheel chalk on it currently but I have one if you wanna bolt it down, just haven't gotten around to it. Its also a tilt bed but you would be better to use a ramp.

Let me know. Takes a 1-7/8 ball and I can even lend the hitch to ya too. Has a flat-4 plug.

- Justin
720-281-3738 (text me)

Justin is that 702 or 720 area code? I think I will need your trailer after all. and probably today.

It is 720.. hes a homo and has an out of state Colorado number... faggg

right.... go buy another hat and fuck off!

- Justin

Brah, I haven't bought a hat in like 3months.. so EAD ASSSSSSS!!!!!

[Image: 9d765f67-981a-472a-ac7e-cd56d5c63b90_zps...1369163536]
Find all posts by this user
Quote this message in a reply
Post Reply 


[-]
Share/Bookmark (Show All)
Facebook Twitter Linkedin Technorati Digg MySpace Delicious

Forum Jump:


User(s) browsing this thread: 4 Guest(s)