Poll: Brakes: DYI or SHOP
Do it yourself
Take it to a Shop
[Show Results]
Note: This is a public poll, other users will be able to see what you voted for.
Post Reply 
Rate Thread
10-14-2016, 01:13 PM
Post: #1
BJs?
I'm going to be needing a brake job done here soon , anyone in the group that can give me a crash course on changing break pads ? Or would y'all recommend just having a shop do it?

Some do drugs, some drink bottles, I solve my problems by twisting throttles.
Find all posts by this user
Quote this message in a reply
10-14-2016, 01:51 PM
Post: #2
RE: BJs?
Sounds like a lil weekend fun! Should be manageable

You only get back what you put in!
Find all posts by this user
Quote this message in a reply
10-14-2016, 02:10 PM
Post: #3
RE: BJs?
You know where to go
Bring it by

I don't need anger management, you need to shut the fuck up
I may have to grow up ,But I can be immature for life
Find all posts by this user
Quote this message in a reply
10-14-2016, 02:23 PM
Post: #4
RE: BJs?
THIS POST IS MISLEADING.

lol but brakes are easy! IF you are just doing the pads its about a 45 min job, maybe less. Depends if you have to take off your front tire or not and or calipers.

"Sin City Sportbikes was founded by Las Vegas sport bike enthusiasts in response to a desire to promote a positive and safe image of the sport. Riders and enthusiasts from all over the Las Vegas Valley have joined together in an effort to give back to a community that has helped and nurtured us."

[Image: finalbanner.jpg]
Find all posts by this user
Quote this message in a reply
10-14-2016, 03:52 PM
Post: #5
RE: BJs?
Awesome! thanks guys , I'll let you know when I have the parts if you wanna check your schedule & let me know what weekend works best for you?

Also 1 more question, for topping off my break fluid; Do I need motorcycle specific break fluid ? Or is all break fluid the same ?

Some do drugs, some drink bottles, I solve my problems by twisting throttles.
Find all posts by this user
Quote this message in a reply
10-14-2016, 04:02 PM
Post: #6
RE: BJs?
YEs you need specific motorcycle brake fluid. Dot 4 is what is recommended for most bikes. Dot 5 is just a waste.

"Sin City Sportbikes was founded by Las Vegas sport bike enthusiasts in response to a desire to promote a positive and safe image of the sport. Riders and enthusiasts from all over the Las Vegas Valley have joined together in an effort to give back to a community that has helped and nurtured us."

[Image: finalbanner.jpg]
Find all posts by this user
Quote this message in a reply
10-14-2016, 04:38 PM
Post: #7
RE: BJs?
I have that too

I don't need anger management, you need to shut the fuck up
I may have to grow up ,But I can be immature for life
Find all posts by this user
Quote this message in a reply
10-15-2016, 12:44 AM
Post: #8
RE: BJs?
If only someone had an intimate knowledge of the workings of a red post-gen Ninja 250...

"250 is like the honey badger, it doesn't give a shit"

906+ years and still going!

**2013-2016 Secretary**
Find all posts by this user
Quote this message in a reply
10-15-2016, 12:48 AM
Post: #9
RE: BJs?
(10-14-2016 04:02 PM)ars0n Wrote:  YEs you need specific motorcycle brake fluid. Dot 4 is what is recommended for most bikes. Dot 5 is just a waste.

I use DOT 12. It's like three times as good as DOT 4.

Also it should say on the top of your reservoir. But unless you have a leak you shouldn't really need to top it off. Just more brake fluid you're going to have to drain later. Especially since the stuff goes bad over time. A freshly sealed bottle is always ideal.

"250 is like the honey badger, it doesn't give a shit"

906+ years and still going!

**2013-2016 Secretary**
Find all posts by this user
Quote this message in a reply
10-15-2016, 10:15 AM
Post: #10
RE: BJs?
Dot 12? Right on thanks for the advice guys !

Some do drugs, some drink bottles, I solve my problems by twisting throttles.
Find all posts by this user
Quote this message in a reply
Post Reply 


[-]
Share/Bookmark (Show All)
Facebook Twitter Linkedin Technorati Digg MySpace Delicious

Forum Jump:


User(s) browsing this thread: 3 Guest(s)